home services contact us
KLIK multi function clip-on KWh meter module

Super compact 1 or 3 phase meter with dual volt free pulse outputs.

Display of all circuit parameters (true rms), plus energy registers and peak demand.

Plug-in connections for voltage reference, clip-on CT’s and pulse output to BMS etc.

Factory assembled multi-meter enclosures available to order

 
klik 2
Hinged Clip-on, Bobbin, and Flexeclamp CT’s for KLIK meters
flexeclamp CT's
bobbin CT's
hinged CT's

 

 Clip-On and Flexeclamp CT’s utilise a precision wound aircored inductor integrally coupled to a hybrid integrator module to provide an ac voltage signal directly proportional to the ac current being measured.

These enhanced Rogowski current transducers do not display the eddy current, hysteresis or saturation errors common to iron cored CT’s. They are light and fully insulated for safety. Since they can be secured with a tie wrap, mounting hardware is not required.

Bobbin CT’s will fit comfortably on 0-5A wires at meters or ammeter switches. Bobbins and split Bobbins are available for up to 100A primary currents.

 
ESCOT Energy Smart Clip-on
escot

 

 

 

 
ESCOT Energy Smart Clip-on TransducersSub-metering installation costs are dramically reduced by simply clipping the ESCOT to the appropriate cable. No local voltage connections are necessary.

The ESCOT’s base unit (located up to 1km away) can accept from 3 to 72 CT’s and will produce KWh output pulses for direct connection to loggers or BMS outstation

 
to 1km away) can accept from 3 to 72 CT’s and will produce KWh output pulses for direct connection to loggers or BMS outstation